Heat Pump Costs: What Should Homeowners Budget?
Air source heat pumps are a significant investment but can reduce running costs and carbon emissions. Costs depend on system size, property insulation and whether radiator upgrades are needed.
Published: June 2025 · Last reviewed: 24 June 2025
The 10-second answer
How much does an air source heat pump cost?
Typical installations often range from roughly £8,000–£15,000+ before any grants.
What adds to the cost?
Radiator upgrades, cylinder replacement, insulation improvements and electrical upgrades.
Do planning fees apply?
Often not — many installations are permitted development. See heat pump planning permission.
Are grants available?
Government schemes change — check the Boiler Upgrade Scheme and other incentives.
Which route might apply?
You may be looking at permitted development if:
- Standard air source heat pump within permitted development limits.
- Unrestricted house.
This does not automatically mean permitted development applies. Every property and proposal is different and still needs to be checked.
You may need planning permission if:
- Listed building or conservation area.
- Oversized unit or prior approval refusal.
Many projects require planning permission, but the answer depends on the individual circumstances.
Heat pump costs are closely tied to the planning route — permitted development installations avoid extra fees, while listed buildings or conservation areas can add planning-related costs on top of the equipment and installation.
Main cost areas
- Heat pump unit and outdoor placement
- Hot water cylinder (usually required)
- Radiator upgrades — heat pumps work at lower temperatures
- Insulation improvements (recommended for efficiency)
- Electrical supply upgrades
- Installation labour
- Planning or prior approval fees (if applicable) — see prior approval explained
Running costs vs upfront cost
Heat pumps often have higher installation costs than gas boiler replacements but lower running costs if the property is well insulated. A whole-house approach — insulation plus heat pump — gives the best results.
Planning-related costs
Most air source heat pumps on houses are permitted development. Potential planning costs include:
- Prior approval in England for some installations — see prior approval explained
- Listed building consent — see listed building consent explained
- Conservation area applications — see conservation areas explained
See heat pump planning permission for planning detail.
Typical cost examples
Cost ranges are indicative guides only — not quotes. Prices vary significantly by region, specification and installer.
Standard air source heat pump replacing gas boiler
£8,000–£12,000 installed. May be permitted development.
Heat pump with radiator upgrades and insulation
£12,000–£18,000+ depending on property size.
Heat pump on listed building
Heritage considerations and consent costs add expense.
How to check your property
Before relying on general guidance, check the property and proposal together.
- Confirm the property type. Houses, flats and maisonettes are often treated differently for permitted development.
- Check whether the building is listed. Listed building consent and planning permission may both be needed.
- Check whether the property is in a conservation area or other restricted area. Local restrictions such as Article 4 directions can remove some permitted development rights.
- Review the size, position and design of the proposal. Measurements, previous additions and neighbour impact all matter.
- Get a heat loss survey. Proper sizing avoids over- or under-specification.
Plimbu helps bring these checks together so you can understand the likely planning route before going further.
Common mistakes
- Installing a heat pump without improving insulation first.
- Ignoring prior approval requirements in England.
- Undersizing radiators for lower flow temperatures.
Frequently asked questions
Is a heat pump cheaper to run than gas?
Often yes with good insulation — but depends on electricity prices and system design.
Can I pair with solar panels?
Yes — see solar panel planning permission and solar panel costs guide.
How can I check planning?
Use Plimbu. See heat pump planning permission.
Check planning for your heat pump
Most installations are straightforward — check property restrictions first.
This guide is general information, not formal planning advice. For property-specific checks, start with your postcode in Plimbu.